Kraken Bond Fastbond Adhesive - Gun Foam, 24 oz

Kraken Bond Fastbond Adhesive Foam is a professional-grade polyurethane foam adhesive designed for rapid and secure bonding of insulation boards and construction materials. Ideal for quickly bonding XPS, EPS foam boards, concrete, stone, and decorative elements, it provides strong initial adhesion within just 60 seconds. Fastbond is perfect for tasks requiring fast results, precision, and reliable strength, making it an eco-friendly, cost-effective choice for both professionals and DIYers.

Features & Benefits

• Quick & Strong Bonding: Initial adhesion in 60 seconds, fully secure in approximately 5 minutes.
• Ready-to-Use: Easy, direct application from the can without additional preparation.
• High Yield & Cost Efficiency: Covers up to 151 sq ft per can; up to 40% savings versus traditional methods.
• Eco-Friendly Formula: No harmful propellant gases; safe for the ozone layer.
• Paintable & Plasterable: After curing, foam can be painted or plastered to match aesthetics.
• Reduces Labor Costs: Quick application reduces labor and project timelines.

Application Areas

• Thermal Insulation: Ideal for bonding EPS, XPS, and other insulation boards.
• Construction Bonding: Suitable for permanently bonding stone, brick, concrete, and decorative elements.
• Decorative Installations: Effective for installing trims, moldings, and lightweight interior elements.
• Specialty Applications: Reliable adhesive for cellular lightweight concrete and polystyrene substrates.

How to Use

• Surface Preparation: Surfaces must be clean, dry, and free from dust, grease, or rust. Slightly dampen surfaces to enhance foam adhesion.
• Can Preparation: Maintain optimal can temperature (68°F / 20°C) for best results. Adjust temperature by placing the can in water if needed.
• Application: Shake the can vigorously. Attach the can securely to the applicator gun, invert can upside-down during use. Apply from bottom to top in vertical applications, from 12-18 inches (30-46 cm) distance. Apply foam in layers to avoid overflow, as foam expands during curing.
• Tooling & Finishing: Use entire can within short intervals to prevent foam hardening in applicator gun. After curing, protect foam from UV exposure with paint or plaster.
• Cleaning: Immediately remove uncured foam with Kraken Bond Foam Cleaner. Once cured, remove mechanically.

Specs

Chemical Base: Polyurethane Prepolymer
Foam Color: Yellowish
Skin Formation: 3±1 minutes (ASTM C1620)
Full Cure Time: 24 hours
Application Temperature: 41°F (5°C) to 86°F (30°C)
Heat Resistance: -40°F (-40°C) to 194°F (90°C)
Yield: Up to 151 sq ft per 24 oz can
Shear Strength: 130-140 kgf/cm²
Shelf Life: 12 months (store properly between 41°F–86°F / 5°C–30°C)