Kraken Bond FastCoat Insulation Spray Foam (Closed Cell Expanding Foam), Class A Fire Rated

• Class A Fire Rated: Meets ASTM-E84 standards, significantly reducing fire spread and smoke development.
• Closed Cell Hybrid Formula: High R-value of 5.66 per inch and thermal conductivity of 0.025 W/(m.K) ensure optimal insulation performance.
• Superior Adhesion: Strongly adheres to most building surfaces, ideal for diverse insulation needs.
• Versatile Application: Effective for attics, crawl spaces, and difficult-to-access areas, ensuring comprehensive insulation coverage.
• Seamless Insulation: Eliminates thermal bridges and prevents condensation by providing continuous insulation.
• High Yield: Provides up to 20 board feet (20 sq ft at 1-inch thickness) per can when applied approximately 16 inches (~40 cm) away at normal speed.
• Eco-Friendly: Free from harmful propellants, promoting sustainable building solutions.
• Waterproof and Air Barrier: Dense foam structure effectively blocks water, air infiltration, and pests.
• Paintable Surface: Once cured, the foam can be painted to match design aesthetics.

• Building Insulation: Suitable for structural elements, attics, crawl spaces, interior walls, balconies, doors, window slopes, and irregular surfaces.
• Vehicle Insulation: Ideal for insulation in automotive bodies, trailers, boats, yachts, and various sea vehicles.
• General Construction: Applicable for roofs, facades, foundations, basements, floors, partitions, ceilings, and cellars.

• Safety Precautions: Contains Diphenylmethane-4,4'-Diisocyanate. Use protective gear and ensure good ventilation to avoid inhalation.
• Surface Preparation: Clean surfaces thoroughly from dust, grease, and contaminants. Slightly dampen surfaces to enhance foam adhesion and expansion.
• Application Temperature: Maintain can temperature between 41°F (5°C) and 86°F (30°C). If stored outside this range, bring cans to room temperature at least 12 hours before use.
• Application: Shake vigorously before and during use. Use the appropriate nozzle (A for vertical, B for ceiling applications). Apply foam upside down in layers, starting from the bottom upwards.
• Application Tip: Make sure the spray gun and the adapter are fully seated. Otherwise, only gas can come out first and the foam cannot come out when there is no gas inside.
• Cleaning: Uncured foam can be removed with Kraken Bond Foam Cleaner. Cured foam requires mechanical removal.
• Finishing: After full cure, foam can be painted or covered to protect from UV exposure.

Packaging: 27 oz
Cure Time: Tack-free in approximately 4 minutes, fully cured within 24 hours.
Shelf Life: 18 months when stored properly.
Storage: Store upright in cool, dry conditions between 41°F (5°C) and 86°F (30°C).
Temperature Resistance: Effective from -103°F (-75°C) to 239°F (115°C).