Akfix HT300 High Temp Silicone Gasket Maker, Red 10.1 fl oz

Akfix HT300 High Temp Silicone Red Gasket Maker is a high-performance silicone sealant developed for sealing, bonding, and repairing works where heat resistance is required. The high-temperature sealant reacts with atmospheric moisture to produce a tough, elastic silicone, making the gasket maker ideal for high-temperature construction applications.

Features & Benefits

• Excellent Heat Resistance: Withstands up to 250°C permanently and up to 300°C temporarily.
• 100% Silicone: Provides durability and flexibility.
• Temperature Flexibility: Remains flexible at low (-40°C) and high (+250°C) temperatures.
• Mechanical Resistance: Resists mechanical enforcement after curing.
• Acetoxy Cure: RTV silicone that is reliable and effective.
• Durable: Will not crack, shrink, or become brittle.
• One Component: Easy to apply.

Application Areas

• Automotives: Ideal for sealing and bonding applications in vehicles.
• Heating Systems & Ovens: Provides sealing/tightness in high-temperature areas.
• Stoves: Suitable for sealing and bonding in stoves.
• Pumps & Motors: Effective for gaskets in pumps and motors.
• Chimneys: Ensures proper sealing for chimneys.
• High-Temperature Applications: Suitable for various bonding and sealing tasks requiring high-temperature performance.

How to Use

• Surface Preparation: Ensure surfaces are clean, dry, and grease-free.
• Application Temperature: Must be between +5°C and +40°C.
• Joint Depth: Depth must be less than width; minimum dimensions are 5x5 mm. For wider joints, the depth should be half the width.
• Tooling: Tool the sealant with light pressure within 5 minutes to spread the material and achieve a professional finish.
• Cleaning: Excess uncured sealant can be cleaned with solvent. Cured sealant must be removed mechanically.
• Joint Dimensions: Recommended joint depth is 6 mm for widths between 6 mm to 12 mm. Maintain a 2:1 width-to-depth ratio.

Specs

• Basis: Silicone Polymer
• Curing System: Acetoxy
• Density: 1.05±0.03 g/ml
• Curing Rate: Min. 3 mm/day (23°C and 50% R.H)
• Elastic Recovery: ≥60% (ISO 7389)
• Temperature Resistance: -40°C to +300°C
• Application Temperature: +5°C to +40°C