Akfix 918N Silicone Caulk for Kitchen and Bathroom 10.5 fl oz

Akfix 918N Kitchen and Bath Silicone is a premium, one-component sealant specifically formulated for sanitary applications. This high-quality, moisture-curing silicone sealant is designed to provide non-corrosive, moldproof, and chemically resistant sealing solutions in wet environments, making it perfect for bathrooms, kitchens, and other areas requiring high hygiene standards.

Features & Benefits

• Mold & Mildew Proof: Prevents the growth of mold and mildew.
• Chemical Resistance: Withstands cleaning agents effectively.
• Temperature Resilience: Remains flexible under extreme temperatures.
• High Elasticity: Offers +/-25% movement capability.
• Weatherproof: UV, water, and weather-resistant.
• Neutral Cure: Non-corrosive and low odor.
• Fast Curing: Quick and efficient curing process.
• Versatile Use: Suitable for both interior and exterior applications.
• Non-Sag: Stays in place without sagging.

Application Areas

• Bathrooms and Kitchens: Ideal for sealing joints around bathtubs, showers, and sinks.
• Tiles and Metal Sheets: Suitable for sealing joints between tiles, ceramic, and metal sheets.
• Expansion Joints: Effective for sealing expansion joints in tile walls.
• Floor and Wall Joints: Perfect for sealing connection joints between walls and floors.
• Glazing: Excellent for sealing joints between glazing and supporting substrates.

How to Use

• Surface Preparation: Ensure surfaces are clean, dry, and free from grease.
• Temperature: Apply between +5°C and +40°C.
• Joint Dimensions: The joint depth should be much less than the width, with a minimum size of 5x5 mm. For wider joints, the depth should be half the width, using a backup material if needed.
• Application: Tool the sealant with light pressure within 5 minutes to ensure it spreads evenly against the joint surfaces.
• Cleaning: Excess uncured sealant can be cleaned with a solvent. Cured sealant should be removed mechanically.
• Joint Widths: Recommended widths are between 10 mm and 35 mm, with a width-to-depth ratio of about 2:1.

Specs

• Basis: Silicone Polymer (Oxime)
• Curing System: Neutral
• Density: Colored: 1.20±0.02 g/ml, Clear: 1.02±0.02 g/ml (ASTM D 792)
• Tack Free Time: 10-15 minutes (23°C and 50% R.H)
• Curing Rate: Min. 3 mm/24 hours (23°C and 50% R.H)
• Movement Accommodation Factor: 25%
• Elastic Recovery: Approx. 100% (ISO 10563)
• Shrinkage: Max. 6% (ISO 7390)
• Paintable: No
• Temperature Resistance: -60°C to +180°C
• Application Temperature: +5°C to +40°C